FUCHS LUBRITECH
BREMER & LEGUIL
CASSIDA
FUCHS
RENOLIN UNISYN OL 100
Description
RENOLIN UNISYN OL is used in loaded industrial and transport hydraulic systems, when the manufacturer specifies a working fluid with good water separation.
RENOLIN UNISYN OL series oils reliably protect against wear and ensure long service life of hydraulic equipment. A standard test on a Vickers V-105C vane hydraulic pump carried out at the independent institute RWTÜV, Essen, showed excellent results. Thanks to its naturally high viscosity index and exceptional low-temperature properties, special economic benefits are achieved on equipment operating under conditions of high temperature fluctuations and/or extremely low temperatures.
Polyalphaolefins and, accordingly, oils based on them are compatible and can be mixed with mineral-based oils in any proportions. The compatibility of polyalphaolefins with common construction materials, seals and paints is similar to mineral-based oils. Thus, switching to RENOLIN UNISYN OL is very simple and does not require preliminary complete flushing of the system.
RENOLIN UNISYN OL series oils reliably protect against wear and ensure long service life of hydraulic equipment. A standard test on a Vickers V-105C vane hydraulic pump carried out at the independent institute RWTÜV, Essen, showed excellent results. Thanks to its naturally high viscosity index and exceptional low-temperature properties, special economic benefits are achieved on equipment operating under conditions of high temperature fluctuations and/or extremely low temperatures.
Polyalphaolefins and, accordingly, oils based on them are compatible and can be mixed with mineral-based oils in any proportions. The compatibility of polyalphaolefins with common construction materials, seals and paints is similar to mineral-based oils. Thus, switching to RENOLIN UNISYN OL is very simple and does not require preliminary complete flushing of the system.
| Specifications | Endorsements | Fuchs recommendations |
|---|---|---|
| • DIN 51 506: VDL • DIN 51 524 part 3: HVLP • • |
Typical characteristics
| Indicators | Unit | Meaning | Method |
| Viscosity grade (ISO VG) | 100 | ||
| Viscosity index | 148 | DIN ISO 2909 |