FUCHS LUBRITECH
BREMER & LEGUIL
CASSIDA
FUCHS
RENOFORM MCO 3802 SN
Description
RENOFORM MCO 3802-SN is a mineral oil-based lubricant containing polar substances and EP additives.
RENOFORM MCO 3802-SN is designed for stamping and deep drawing of body metal parts of medium and high complexity.
RENOFORM MCO 3802-SN has been tested for compatibility with anti-corrosion products and prelubes from the ANTICORIT series. RENOFORM MCO 3802-SN meets the requirements for anti-corrosion protection, washability and downstream compatibility of standard protective oils.
RENOFORM MCO 3802-SN is suitable for use on all types of sheet metal, including galvanized and aluminized surfaces. The oil film remaining after stamping serves as temporary interoperational protection against corrosion.
RENOFORM MCO 3802-SN is approved by a number of automotive companies and recommended by the German Automobile Manufacturers Association (VDA).
RENOFORM MCO 3802-SN is designed for stamping and deep drawing of body metal parts of medium and high complexity.
RENOFORM MCO 3802-SN has been tested for compatibility with anti-corrosion products and prelubes from the ANTICORIT series. RENOFORM MCO 3802-SN meets the requirements for anti-corrosion protection, washability and downstream compatibility of standard protective oils.
RENOFORM MCO 3802-SN is suitable for use on all types of sheet metal, including galvanized and aluminized surfaces. The oil film remaining after stamping serves as temporary interoperational protection against corrosion.
RENOFORM MCO 3802-SN is approved by a number of automotive companies and recommended by the German Automobile Manufacturers Association (VDA).
Typical characteristics
| Indicators | Unit | Meaning | Method |
| Viscosity at 40°C | mm²/s | 100 | DIN 51 562 |
| Flash point | °C | 142 | DIN 2592 |
| Processed materials | St | ||